Upgrade your lights output with the 21 watt HID. This item is ready for use with E/O cord. Includes bulb, test tube, ballast, fittings, and E/O cord.

Upgrade your lights output with the 21 watt HID. This item is setup for installation onto an existing standard cord. Includes bulb, test tube, ballast, fittings, and cord.

50 watt HID bulb

24 volt, 4 amp NiMH charger, 115v/230v input (Apollo HMI)

18 watt HID bulb

12 volt, 4 amp NiMH charger,115v/230v input, for all Explorer and non-HMI Apollo systems

This underwater connection is a great improvement for anyone looking for more functionality from their light. With these plugs you can unplug one light head and plug in another while underwater on the dive. Carry a backup 21W light head in your pocket and switch back and forth as needed. Other uses include dual light heads at the same time and supplying power to a heated drysuit undergarment. Being able to swtich light heads also allows the diver to manage burn time more easily. It is recommended that you send your light in to Halcyon to have these installed.

Goodman head, body, and thumb holder with the Halcyon reflector.

21 Watt HID Bulb

The "Y" connnector allows the diver to split the cord for multiple light heads.

The Goodman head and body with the Halcyon reflector.

091 Video Reflector (large, dimpled) with delrin base for 50W HID lights.

10 watt HID bulb (for Halcyon HID lights sold before Fall 2002)

10 watt HID bulb (for Halcyon HID lights sold after Fall 2002)

10 watt HID bulb and reflector (MR11) for 6 degree fixed-focus lighthead

091 Video Reflector (large, dimpled) with Delrin Base for 18W/21W HID lights.

HMI lamp cover

Halogen bulb slug assembly w/ standard cord (no Goodman handle)

091 Video Reflector (large, dimpled) Delrin base not included

50 watt HID lamp cover (test tube)

Ultra-bright Halcyon reflector (standard Goodman reflector)

Aluminum handle and plate for Goodman handle, coldwater

Aluminum handle and plate for Goodman handle, non-coldwater (original) size

12 volt, 0.6 amp charger, 110v input (Proteus lights)

12 volt, 0.6 amp charger, 220v input (Proteus lights)

12 volt, 0.6 amp charger, 110v input (Proteus 3D models)

Sealing gland and cord strain relief for Halcyon lights.

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

18/21 watt HID & Halogen Lamp Cover (test tube)

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

100 watt Halogen Bulb

This is the standard latch that is used on all Halcyon lights. Each latch is made up of two seperate pieces which attach to the lid and body of the light.

Designed to protect your bulb while in transit or storage. Fits the 18/21W light head for all Halcyon lights. A must for the avid light user.

50 watt Halogen Bulb

The "Black" switch boot for Halcyon Helios lights.

The standard switch for all Halcyon lights.

This is the belt loop used on the canister lights for mounting to your harness.

The "Blue" switch boot for Halcyon Explorer lights.

This blue lid o-ring will fit the Explorer 9 amp canister.

This blue o-ring fits the Explorer 4.5 lid.

This blue o-ring fits the Explorer 13.5 lid.

50 watt lamp cover o-ring

Nylon lock-down screw for Goodman Handles.

200 watt HMI bulb

Call for pricing