Upgrade your lights output with the 21 watt HID. This item is ready for use with E/O cord. Includes bulb, test tube, ballast, fittings, and E/O cord.

Upgrade your lights output with the 21 watt HID. This item is setup for installation onto an existing standard cord. Includes bulb, test tube, ballast, fittings, and cord.

This battery pack is designed for the Explorer/EOS 13.5 canister light.

Upgrade your existing light to an EOS 12 Watt LED Head w/ E/O Cord and Goodman Handle.

Features

*Advanced LED array provides powerful 600 Lumen output in a small, attractive form.
*Lux rating at one meter is 10700; at three meters, 1450; and at five meters, 530.
*High-quality, aluminum light head with a Type 3, Class 2 Mil-Spec hard coat is durable and corrosion resistant.
*Aluminum light head optimizes heat dissipation while protecting LED electronics.
*High-quality LEDs are rated for approximately 20,000 hours and protected by a nearly indestructible light head.

Upgrade your existing light to an EOS 12 Watt LED Head w/ Standard Cord and Goodman Handle.

Features

*Advanced LED array provides powerful 600 Lumen output in a small, attractive form.
*Lux rating at one meter is 10700; at three meters, 1450; and at five meters, 530.
*High-quality, aluminum light head with a Type 3, Class 2 Mil-Spec hard coat is durable and corrosion resistant.
*Aluminum light head optimizes heat dissipation while protecting LED electronics.
*High-quality LEDs are rated for approximately 20,000 hours and protected by a nearly indestructible light head.

This battery pack was designed for the Explorer and EOS 9 canister light system.

Explorer 9 amp Battery Details

12-watt LED
Full power: 10 hours
Half power: 20 hours

21-watt HID
4 hours

Specifications
2.95” OD / 11.63” L (7.5 cm OD / 29.5 cm L)
Weight: 5.76 lb (2.6 kg)
Buoyancy: -2.8 lb (-1.3 kg)

Nickel-Metal Hydride Battery Pack

This battery is designed for the Explorer/EOS 4.5 Battery Pack.

24 volt, 4 amp NiMH charger, 115v/230v input (Apollo HMI)

18 watt HID bulb for Halcyon model HID lights

12 volt, 4 amp NiMH charger,115v/230v input, for all Explorer/EOS and non-HMI Apollo systems

50 watt HID Bulb, Bright Star Assembly

This underwater connection is a great improvement for anyone looking for more functionality from their light. With these plugs you can unplug one light head and plug in another while underwater on the dive. Carry a backup 21W light head in your pocket and switch back and forth as needed. Other uses include dual light heads at the same time and supplying power to a heated drysuit undergarment. Being able to swtich light heads also allows the diver to manage burn time more easily. It is recommended that you send your light in to Halcyon to have these installed.

21 Watt HID Bulb

Goodman head, body, and thumb holder with the Halcyon reflector.

The "Y" connnector allows the diver to split the cord for multiple light heads.

10 watt HID bulb (for Halcyon HID lights sold before Fall 2002)

10 watt HID bulb (for Halcyon HID lights sold after Fall 2002)

10 watt HID bulb and reflector (MR11) for 6 degree fixed-focus lighthead

The Goodman head and body with the Halcyon reflector.

Video Reflector (large, dimpled) with delrin base for 50W HID lights.

HMI lamp cover

Video Reflector (large, dimpled) with Delrin Base for 18W/21W HID lights.

091 Video Reflector (large, dimpled) Delrin base not included

Ultra-bright Halcyon reflector (standard Goodman reflector)

50 watt HID lamp cover (test tube)

*Call or email for availability
While Supplies Last!

This is the replacement reflector dish for the 10 watt focusable HID light head.

Aluminum "T" and "U" for LED Goodman Handle

Aluminum handle and plate for Goodman handle, coldwater

Aluminum handle and plate for Goodman handle, non-coldwater (original) size

Sealing gland and cord strain relief for Halcyon lights.

100 watt Halogen Bulb

While Supplies Last!

*Call or email for availability

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

18/21 watt HID & Halogen Lamp Cover (test tube)

The ideal solution for the diver on the move. This lid was designed to replace the light head/lid component while in transit. Vented port for use on airplanes.

This is the standard latch that is used on all Halcyon lights. Each latch is made up of two seperate pieces which attach to the lid and body of the light.

Designed to protect your bulb while in transit or storage. Fits the 18/21W light head for all Halcyon lights. A must for the avid light user.

50 watt Halogen Bulb

While Supplies Last!

*Call or email for availability

10 watt HID Lens

The "Black" switch boot for Halcyon Helios lights.

The standard switch for all Halcyon lights.

This is the belt loop used on the canister lights for mounting to your harness.

The "Blue" switch boot for Halcyon Explorer lights.

This black o-ring is ideal for the Halcyon Helios 4.5 Lid (Clear Acrylic Lid)

While Supplies Last!

*Call or email for availability

This blue lid o-ring will fit the Explorer 9 amp canister.

This black o-ring is ideal for the Halcyon Helios 9 Lid (Clear Acrylic Lid)

While Supplies Last!

*Call or email for availability

This blue o-ring fits the Explorer 4.5 lid.

This black o-ring is ideal for the Halcyon Helios 13.5 Lid (Clear Acrylic Lid)

While Supplies Last!

*Call or email for availability

This blue o-ring fits the Explorer 13.5 lid.

50 watt lamp cover o-ring

While Supplies Last!

*Call or email for availability

Nylon lock-down screw for Goodman Handles.

10 watt HID Lens O-Ring

18 Watt HID & Halogen Lamp Cover O-Ring (2 required on the assembly)

18 Watt HID & Halogen Lamp Cover Bumper O-Ring

21 Watt HID Lamp Cover Bumper O-Ring

200 watt HMI bulb

*Call, email, or instant message us for pricing & availability